OPEN AS USUAL! - SumoPower remains open & is available on getting your orders shipped! - Our website shows LIVE STOCK LEVELS with up-to-date information! - Our phone lines & Contact E-Mails are available for your needs and requests! Please note that there may be a slight delay in getting back to you due higher demands!

Radium: Bulkhead Fuel Pump Harness Assemblies (Internal Harness)

Radium: Bulkhead Fuel Pump Harness Assemblies (Internal Harness)

Stock Code17-0001
Price Ex. VAT £86.18
Price Inc. VAT £103.42


Ships In 7-10 Days

Flying lead bulkhead wiring harnesses are included with all universal Radium Engineering Fuel Surge Tanks and do not need to be purchased separately.

These harnesses are used in multiple Radium Engineering products including fuel surge tanks, fuel pump hangers, fuel cells, etc. For a complete bulkhead mating connection, select one internal and one external harness from the lists above.

Internal Harnesses:

All internal bulkhead harnesses include submersible fuel resistant wiring. Depending on part number, these wires are 3-5" long with populated terminations (connector, terminals, etc.) that secure to the associated pump(s). After the soldering procedure, the connector terminals are potted with a special formulated (proprietary) epoxy that is compatible with all fuel types including alcohol blends, such as E85.

 photo Bosch_internal_044_3_zpsozum8hei.jpg

Single and dual pump harnesses use a nickel-plated aluminum connector (shown above) that meet "IP66/IP68 NEMA 250 6P". The triple pump harness uses a larger 7 position "NEMA 6P 13: IEC IP67" connector (shown below) that is populated with 6 wires for three pumps. All internal connectors use O-ring seals resisting all fuel types.

 photo MPFST_Feb_2013_16_zpshydv42s5.jpg

All panels must be 0.06-0.18 inches thick. See the drawing below for cut outs for each bulkhead connector.

 photo Panel_Requirements_zpsadedvcej.jpg

External Harnesses:

All external harnesses use high quality (automotive/aircraft grade) TXL wire. The external harnesses are covered with a braided sleeving that is resistant to all chemicals and elevated temperatures. The high quality connectors meet "NEMA 6P" and are sealed to permit installation in weather exposed areas. They are 24" long and colour coded for multiple pump applications.


 photo whiteline-rear-adjustable-control-arms-13-subaru-brz-scion-fr-s-3.gif_zps4jdgzuu1.jpeg

Single Pump Harness:

- Nickel-plated EMI/RFI shielded retainer nut.
- 2 wires (red, black).

Dual Pump Harness (shown above):

- Nickel-plated EMI/RFI shielded retainer nut.
- 4 wires (red, black, orange, grey).

Triple Pump Harness (shown below):

- Quarter turn nylon retainer nut.
- 6 wires (red, black, orange, grey, white, brown).

 photo MPFST_flying_lead_zpsg7l4zxgu.jpg

Universal product for all Evo Models. Please select from the options on the right.

Stock images used. Actual product may vary.

We have placed cookies on your device to help make this website better.